Allows gasket to be positioned before assembling and takes up surface irregularities. Excellent conductor of heat. Must be used in conjunction with gaskets.

Some gaskets can be reused.

• A gasket positioning spray that becomes tacky approx. 2 minutes after application of the film
• Gaskets can be re-aligned for up to one hour
• The metallic copper content acts as a filling agent, smoothing out any surface irregularities

• 400ml aerosol
• Flammable
• Keep out of reach of children
• Ensure good ventilation during use. Protect from sunlight
• Store indoors
• Do not expose to temps above 50°C
• Do not spray on naked flame or incandescent material

• Excellent adhesion properties
• Minimal fling-off when rubber boot is torn
• High shock absorbing lubricant
• Lubrication of universal and constant velocity joints of front wheel drive vehicles and for slow and fast moving plain and anti-friction bearings

Colour: Black.

• 90g tube
• Store under cover with lid/tube closed, away from vibrating floor
• Remove excess from skin and wash with Spanjaard Hand Cleaner followed by soap and water

Wynn’s Grinding Paste is water based abrasive paste solution for asperity removal from metal surfaces. It is a dual package containing fine and coarse grit for professional results. Can be used to seat new valves, sharpen blades, remove score marks, lapping, tool making etc.

• Dual grit size package
• Provides lubrication while grinding
• Professional results in multiple application

White Lithium-based Grease aerosol lubricant sprays on like a fluid, then congeals to a grease for prolonged lubrication intervals. Effective lubrication and protection for automotive, domestic and light duty applications, including battery terminals, locks, hinges, latches etc.

• Resistant to water
• Prevents corrosion
• Temperature range from -150C to 1200C
• Excellent metal retention

Wynn’s Super Epoxy is a two-component, low viscosity, fast curing adhesive formulated to bond an extensive range of substrates including metal, ceramic, rigid plastic and wood. Applied in single action, this product cures with excellent adhesion and is extensively used in applications such as metal toys, automobile plastic panels, fuel tanks, bumpers, mirrors, electrical appliances and industrial oil tanks, transformers and radiators.

Applications

Bonds metal, ceramic, rigid plastic, wood as well as many other materials

Packaging

6 x 32ml

Wynn’s Steel Epoxy is a two-component, low odour, fast curing adhesive formulated to bond an extensive range of substrates including steel, brass, copper, iron, plastic, wood, concrete and ceramics. Applied in single action, this product cures with high bonding strength, resistance to high temperature, pressure and grease. Suitable for use to repair worn valve seats, cracked housings, copper and cylinder heads, gas tank, plumbing and radiator leaks, torn keyways, stripped threads, toys and furniture.

Applications

Bonds steel, brass, copper, iron, plastic, wood, concrete and ceramics

Packaging

6x 32ml

Wynn’s Coolant/ Antifreeze is a concentrate designed to meet old and modern vehicle requirements made from the finest Euro spec glycols, anti-corrosion and anti-foam agents to provide superior protection.

• Freezing Point at 40% dilution -25 degrees C (ASTM D1177)
• Wynn’s Coolant/Antifreeze meets ASTM D3306/D4985;
• SAE J-1034; British & Fed. Standards
• Protects cooling system from fouling
• Prevents corrosion
• Anti-foaming agent prevents cavitation and pitting

Applications

• Suitable for all radiator types from classics to modern aluminium core radiators
• The 1 Litre concentrate can be diluted with demineralised water as per vehicle's requirements

Directions

• Dilute contents as desired, then simply pour into the radiator filling reservoir until it is full
• Run the vehicle until normal operating temperature is reached
• Continue to top up while vehicle is idling until the full level is maintained
• It is recommended that all old coolant is flushed using Wynn’s Radiator Flush before replacing with new coolant
• Do not mix with OAT coolant

Packaging

12 x 1 Litre

Wynn’s Bright Spark is an intelligent electrical circuit and contact cleaner. Spray directly onto surfaces to be cleaned to restore good electrical contact. It will remove all dirt, flux and oily residue as well as remove moisture. Ideal for sensitive electronics, printed circuits, switches and electrical panels. Safe to use on most plastics, rubber and metal.

• Fast and convenient cleaning action
• Quick drying formula removes moisture
• Inhibits corrosion
• Extension tube facilitates easy spot cleaning in hard to reach areas
• Non-Flammable

Directions

• Spray directly onto surfaces to be cleaned          
• Insert extension tube to spot clean and reach into awkward areas          
• Warning: Test for compatibility before using on plastics

Packaging

12 x 200ml

Wynn’s Carb Cleaner is a powerful solvent which enables you to clean the carburettors without dismantling. Simply spray it into the float chamber vent to clean the inside and down the throat for rapid results. Spray onto the outside to clean the exterior.

Cleans without dismantling

Rapidly dissolves gums, resins, & tar deposits

Restores smooth idling & efficient fuel delivery

Applications

• Fuel starvation
• Dirt and gum in carb blocking jets
• Old oxidised fuel left in carburettor
• Starting problems

Directions

• Remove air filter
• Spray all exposed surfaces in carburettor throat               
• Start engine - spray into float chamber.
• Rev engine moderately
• Stop engine and spay-clean outside surfaces as required.            
• Adjust air fuel mixture and idle 

Packaging

12 x 500ml

12 x 285g

12 x 200ml

Wynn’s Engine Cleaner & Degreaser is a solvent based degreaser for heavy duty cleaning of engine parts and exterior. It lifts dirt, grime and oil off bikes, chains, quads, etc.

• Strong solvent action lifts dirt and grime as well as oil from fouled motor components
• Effective on the heaviest grease build-up
• Can be used in a high pressure sprayer
• Easy to use squirt bottle for convenient and efficient cleaning

Applications

• Cars, bikes, quads, trailers, bicycles, engine parts etc.
• Avoid solvent sensitive materials such as paintwork and soft plastics

Directions

• Use easy spray nozzle to apply to dirty area
• Brush or wipe away dirt with cloth
• Rinse off with water

Packaging

12 x 500ml

Wynn’s Engine Start is the easy solution to starting problems. Avoids wear of the starter motor and prevents battery drain. Engine start assists with cold weather starting, flooded engines and helps restore fuel pump pressure after a vehicle has run dry.

Unlike many starting fluids, Wynn’s Engine Start can be used in 4 stroke and 2 stroke engines as it contains a friction proofing lubricant.

• Fast acting starting solution
• 2 stroke engine safe
• Contains friction proofing
• For petrol or diesel engines

Applications

• Petrol or Diesel engines to promote easy starting
• Vehicles and motor bikes, especially if not in regular use
• Outboard motors and two stoke engines
• Mowers, chain saws, weed eaters etc.

Directions

• Hold can upright              
• Remove air filter for best results              
• Spray into air intake for a few seconds then crank engine            
• Repeat if necessary       

Packaging

12 x 200ml

12 x 375ml

Wynn’s Sensor Safe, High-Temp RTV is a one-component, room temperature vulcanizing gasketing compound with features of high stability and durability. Specifically designed to provide reliable formed-in-place gaskets for mechanical assemblies that withstand operating environments up to 3430C and resistant to engine oils, fuel and anti-freeze. This product is extensively used in bonding and sealing applications on automobile engines such as joint cover of tappet cover, intake exhaust manifolds, timing chain cover, oil sump, transmission pan, and household electrical appliances.

Packaging: 90ml

Wynn’s Throttle Body and Air Intake Cleaner will remove sticky residue, caused by oil mist crankcase fumes, from air intake system components as well as petrol residues, gums and resins. These tar like deposits build up on the idle speed control and butterfly valves leading to irregular airflow and erratic idling. Formulated for modern petrol vehicles, will not remove protective surface coatings and is O2/ Lambda sensor safe

Packaging: 285g

• Removes sticky air intake build up
• Restores correct airflow to improve air/fuel mixture
• Cleans contaminated EGR & idle speed valves
• Restores smooth idling & throttle response

A strongly adhesive, water repellent, penetrating lubricant for bike quad and other chain mechanisms. Non-conductive.

Packaging: 375ml

• Reduces friction and wear
• Performs through wide temperature range
• Resistant to dirt, water and corrosion
• Oil consistency

A specially formulated non-fling chain lubricant for high velocity chains. Non-conductive.

Packaging: 375ml

• Reduces friction and wear
• Performs through wide temperature range
• Resistant to dirt, water and corrosion
• Wax consistency

Charge for oil is a high mileage oil additive for the car with some wear and tear and using oil. A viscosity index improver prevents blow-by by maintaining oil viscosity throughout the temperature range preventing oil smoke. Anti-wear agents provide extra boundary lubrication protection reducing further wear of engine parts while quietening valve train and engine noise. Use in manual gearboxes and differentials or as an assembly lube, to ensure superior wear protection and smooth operation.

Packaging:          375ml

                             500ml

• Reduces oil consumption in engines with signs of wear
• Minimises exhaust smoke by providing better piston ring sealing
• Improves oil pressure to better protect moving parts
• Provides anti-wear protection to reduce further wear

Chilly Willy is a pre-mixed high performance inorganic coolant /antifreeze package for old and modern vehicles. Made from the finest Euro spec glycols, anti-corrosion and anti-foam agents to provide superior protection.

Freezing Point: -250 C (ASTM D1177)

ASTM D3306/D4985; SAE J-1034; British & Fed. Standards.

Packaging:          1L

                              2L

Penetrates and lifts oil, grease and stains, cleans stubborn dirt and grime in the household and workshop including kitchens, ovens, laundry stains, showers, toilets, work surfaces garages, tools, bikes, car under bonnet, braai’s and other tough cleaning jobs.

Packaging:      500ml

                        500ml (squeezer)

                        750ml

                        2L

                        2L Lemon

                        2L Lavender

• No bleach or ammonia
• Biodegradable
• Concentrated formula
• General purpose cleaner and degreaser

High quality heavy duty grease intended primarily for automotive universal joint application. Excellent adherence and high temperature characteristics ensure proper lubrication of moving parts at all times.

Packaging:          90g

• High resistance to water wash
• Excellent protection against rust and corrosion
• Long service life
• Good retention under shock loading

Diesel Treatment is the complete Diesel additive to maintain best performance in all conditions. Cleans Injectors, reduces soot emissions and keeps EGR and DPF systems clean with Cerium Technology, Biocide kills algae and micro-organisms, flow improver prevents diesel waxing to well below freezing point. Added lubricity extends injector life and lubricates fuel pump. Assists with water separation by demulsifying the fuel and water for easy and complete removal through the water trap.

Packaging:          500ml

• Cleans injectors, turbo, EGR valve and diesel particulate filter (DPF)
• Kills micro-organisms and algae associated with diesel tank contamination
• Lubricates injector increasing efficiency and extending injector life
• assists with water separation for complete removal of free water
• Prevents diesel freeze and filter clogging in cold temperature environment
• With Cetane Enhancer