Superior flushing fluid additive to be used before an oil change. Wynn’s Engine Flush, is fast acting and provides extra wear protection while dissolving sludge and oil deposits with a unique anti-wear additive. Flush after just 15 minutes or continue activation for up to 200km’s while you drive. Engine Flush will remove sticky deposits from the pistons rings restoring compression as well as clean out oil channels and galleries to ensure complete lubrication of all working components when oil is replaced.

Packaging:          375ml

• Cleans engines internally while providing anti-wear protection
• Frees sticky piston rings, hydraulic valve lifters, and variable timing systems
• Removes lacquer, varnish & sludge deposits from the crankcase
• Restores compression

This seal rejuvenator and viscosity index improver has a dual acting stop leak action. While swelling dry and hardened rubber/ neoprene seals and O-rings to stop oil leaks, the viscosity index improver prevents oil from thinning at high temperature and seeping past the rings causing blow-by smoke. Excellent for restoring valve stem seals.

Packaging:          375ml

• Reduce oil burning and exhaust smoke
• Reduce unsightly leaks from camshaft and crankcase oil seals
• Ideal for use in used car preparation

Wynn’s Gear Oil Treatment and Assembly Lube, is a fully supplementary gear oil package scientifically formulated using the latest technology to provide all the below listed gear box, differential and wide variety of automotive and industrial equipment. Formulated to meet international vehicle manufacturer’s specifications of extreme pressure gear oils and recommended for use in limited slip differentials.

Packaging:          90g

• Reduces gear friction & wear extending component life
• Provides oxidation & shear stability for longer oil life
• Quietens diff & manual gearbox whine providing smoother gear changes
• Anti-Wear & Extreme Pressure additives provide excellent protection during engine rebuilds & component assembly

Wynn's Hydraulic Valve Lifter Concentrate is an oil soluble supplement designed to restore efficient working of hydraulic valve lifters.

Packaging:          PN 76841 – 24x325 ml – NL/FR/DE/IT/DA/NO/HU

PN 76844 – 24x325 ml – EN/ES/RU/SV/FI

• Releases sticking valve stems and hydraulic valve lifter components.
• Quietens valve train noise.
• Dissolves dirt, gum and varnish deposits in the oil channels.
• Contains EP agents for extra protection.
• Does not harm catalytic converters.
• Compatible with all mineral, synthetic, single- and multigrade oils and suitable for regular and low SAPS applications.

A multi-purpose penetrating lubricant for chains, hinges locks, castors, fishing reels, tools etc. Excellent rust penetrating properties when used as a de-gripping agent.

Packaging:          200ml

                                375ml

• Silicone free multi-purpose lubricant
• Rust penetrant
• Dissolves and cleans tar, grease and sticker residue
• Protects against corrosion
• Repels Water

Wynn's Oil System Cleaner is an oil soluble supplement cleaning and protecting the oil circulation system and preventing contamination of fresh oil by residues left behind.

Packaging:          325 ml

• Dissolves sludge, dirt and deposits in the crankcase, the oil ducts and all parts in the oil circulation system.
• Keeps the dissolved impurities in suspension and prevents their agglomeration.
• Frees piston rings and hydraulic valve lifters.
• Avoids contamination of fresh oil by residues left behind.
• Prolongs the lifetime of the new oil due to the cleaning procedure.
• Contains EP additives for additional protection against wear during the treatment.
• Does not harm catalytic converters.
• Compatible with all mineral and synthetic engine oils and suitable for regular and low SAPS applications.

Designed to dissolve high temperature petrol deposits on the injector pintle, keeping injectors clean and lubricated. Removes water from the fuel system, restores efficient fuel delivery and is safe to use with all fuel system components including high pressure direct injection, catalytic converters and O2/ lambda sensors.

Packaging:          375ml

• Reduces exhaust smoke caused by incomplete fuel combustion
• Removes injector pintle deposits restoring fuel flow and optimum fuel atomisation
• Improves fuel economy and overall engine performance

<iframe width="560" height="315" src="https://www.youtube.com/embed/9P96_LcfSoQ" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen></iframe>

Power Boost is a catalytic converter safe, octane enhancing additive for high performance petrol engines with knock sensor technology. The increased octane provides more power than would be delivered using standard fuel.

Packaging:          325ml

• Increases the octane number (RON)by up to 3 units

• Provides upper cylinder lubrication for up to 5,000km
• Increases horsepower & protects valves
• Overcomes pre-ignition, pinging or knocking in the engine
• Catalytic converter, oxygen sensor & E10 safe

Wynn’s Power Steering & Auto-transmission Conditioner is an oil soluble supplement developed to eliminate PAS (Power assisted Steering) stiffness, shudder and noise as well as ease shifting of automatic gearboxes. Prevents oil leaks by rejuvenating the seals while maintaining optimum performance of the PAS pump and load bearing components. Wynn’s Power Steering & Auto-transmission Conditioner can be added to all conventional ATF and power steering fluid.

Packaging:          375ml

• Eliminates Power Steering stiffness, shudder and noise

• Provides smoother operation of power assisted steering & auto-transmission gear changes
• Prevents ageing and oxidation of automatic transmission and power steering fluids
• Prevents and cures oil leaks by nourishing the rubber/ nitrile seals and O-rings

Wynn's Radiator Flush is a concentrate to clean automotive cooling systems.

Packaging:          375ml

• Powerful acid free radiator cleaner.
• Dual action:
• 1. Removes scale.
• 2. Eliminates rust, deposits and oily residues.
• Excellent performance in all types of cooling liquid, including OAT coolant.
• Keeps dirt and particulates in suspension whilst cleaning.
• Safe for rubber hoses, seals and all metals in the cooling system.
• Extremely effective in all closed-circuit cooling systems.
• Restores the optimal operation of the controls within the cooling system.

Wynn's Radiator Stop Leak is a sealing product to stop small leaks in the cooling system, with anti-corrosive properties.

Packaging:          325ml

• Stops and prevents leakages in the radiator, cooling and heating system.
• Stops head gasket leaks.
• Will not harm rubber hoses, gaskets or other system components.
• Is compatible with all antifreezes and coolants, also with OAT coolants (Organic Acid Technology).
• Is formulated to avoid clogging of radiator waterways and temperature sensors.
• Enhanced protection against rust and corrosion.

Promotes complete petrol combustion while cleaning carbon deposits from the upper cylinder preventing preignition and engine run-on. Ideal to use in engines which are not run regularly to avoid fuel deposits and carbon build up caused by contamination and adverse effects of fuel degradation.

Packaging:          125ml

• Supports complete combustion
• Frees sticky piston rings
• Reduces exhaust emissions
• Maintains lambda/O2 sensor and EGR cleanliness
• Inhibits corrosion and improves fuel consumption