• Protects the fuel system against wear and damage
• Reduces rust and corrosion
• Cleans intake valves, fuel injectors, manifolds, ports, carburetors and combustion chamber deposits
• Suitable for petrol engines only

• Cleans intake valves and fuel injectors
• Dissolves tough deposits
• Improves cold starting
• Optimises injection efficiency and fuel atomisation
• Provides corrosion protection for the entire fuel system
• Suitable for leaded and unleaded petrol

• Improves high temperature viscosity of engine oil for improved engine efficiency
• Reduces cold start-up damage
• Promotes a quieter, smoother engine by reducing exhaust smoke and engine noise

• Reduces exhaust smoke and oil consumption
• Increases viscosity of motor oil
• Boosts oil pressure and cylinder compression
• Improves engine efficiency while reducing engine noise

• Protects engine surfaces during cleaning
• Effectively removes sludge, varnish and gum deposits from any type of petrol or diesel engine

Aerosol version of Anti-Scuff Paste. Available with standard or special actuator for open gears.

• Assembly compound to ensure bedding-in without scuffing, pick-up or scoring
• Anti-seize for pipe threads
• Pre-treatment of large open gears

• 350ml aerosol
• Petroleum base
• Operating temp -20 to 150°C
• Store under cover/indoors
• Flammable
• Protect from sunlight
• Do not expose to temps above 50°C
• Keep out of reach of children
• Do not spray on naked flame or incandescent material

A high quality product that cleans gum and

varnish deposits from the intake valves, piston rings and combustion chambers.

• To clean dirty valves, combustion chambers and other fuel system components
• Recommended for sluggish engines due to sticking valves

Appearance: Brown liquid

• 375ml PVC bottle
• Keep away from open flames and heat
• Store indoors
• Keep out of reach of children

• Apply after terminals have been cleaned
• Will prevent corrosion
• Protects terminals and all metal surfaces against corrosion
• Suitable for home, car and industrial use

• 200ml aerosol
• Disconnect battery leads
• Wash terminals and battery cradle with Sodium Bicarbonate solution
• Clean terminals with emery paper
• Allow to dry. Spray from a distance of 30cm
• After use invert can and spray to clear the nozzle

• For use on V, flat and conveyor belts
• Prevents slippage and extends useful belt life
• Will not harm rubber
• Revives old belt materials, rubber, leather and fabric
• Makes new belts last longer
• Removes old deposits without attracting dirt or dust

Appearance: Colourless

• 400ml aerosol
• Ensure good ventilation
• Flammable
• Protect from sunlight
• Store indoors
• Do not expose to temps above 50°C
• Keep out of reach of children
• Do not spray on naked flame or incandescent material

A heavy duty brake system cleaning spray for cleaning the drum & disc brakes, brake cables, rotors & disc pad/drum lining surfaces without disassembly.

• Reduces disc brake squeal
• Improves brake performance
• Fast drying with no residue
• Removes brake pad phenolic resins, brake pad dust and other brake pad degradation products
• Meets European Union requirements for dust free maintenance

Appearance: Colourless Liquid

Odour: Solvent like

• 500ml aerosol
• Store indoors
• Flammable
• Protect from sunlight
• Do not expose to temps above 50°C
• Keep out of reach of children
• Do not spray on naked flame or incandescent material

Superior (non-black) chain & linkage spray. For motor cycles, bicycles and lawnmowers. Penetrates like oil, lubricates like grease. See Liquid Grease for heavy duty black coloured aerosol.

• Motorcycle chains, cables, seat runners, hinges, locks, window mechanisms, wheel jacks
• Domestic - hinges, electric garage door slides and chains
• Suitable for standard and “O” type chains

Colour: Light Red

• 200ml aerosol
• Operating Temp -30 to 110°C
• Flammable
• Do not expose to direct sunlight 
• Store indoors
• Do not expose to temps above 50°C
• Keep out of reach of children
• Do not spray on naked flame or incandescent material

A superior blend of waxes and extreme-pressure additives in aerosol form for application to all motorcycle chains.

• Prolongs chain life by protecting against wear, water and corrosion
• Penetrates deeply into linkages
• Adheres strongly to the chain, eliminating fling off
• Does not attract dirt

Colour: Brown, waxy

• Flammable
• Do not expose to direct sunlight
• Do not spray near open flame
• Keep out of reach of children
• Do not breathe vapour
• Do not expose to temps above 50°C
• Do not spray on naked flame or incandescent material

• Prevents the seizure of bolts & nuts up to 1100°C or under corrosive conditions
• Meets MIL-A-907E
• Eliminates disc pad squeal
• Assembly of all threaded connections subject to high temperatures i.e. spark plug threads, cylinder head and exhaust manifold studs
• Chrome compound is the most superior product for seizure prevention of threaded components under most unfriendly for corrosive/high temperature conditions
• Not suitable for use on stainless steel
• For stainless steel use Nickel or Chrome Compound

Key metallic component: Copper

Colour: Golden Copper

• Consistency NLGI 2
• Dropping Point - none
• Store under cover with lid on, away from vibrating floor
• Remove excess from skin and wash with Spanjaard Hand Cleaner followed by soap and water

Allows gasket to be positioned before assembling and takes up surface irregularities. Excellent conductor of heat. Must be used in conjunction with gaskets.

Some gaskets can be reused.

• A gasket positioning spray that becomes tacky approx. 2 minutes after application of the film
• Gaskets can be re-aligned for up to one hour
• The metallic copper content acts as a filling agent, smoothing out any surface irregularities

• 400ml aerosol
• Flammable
• Keep out of reach of children
• Ensure good ventilation during use. Protect from sunlight
• Store indoors
• Do not expose to temps above 50°C
• Do not spray on naked flame or incandescent material

• Excellent adhesion properties
• Minimal fling-off when rubber boot is torn
• High shock absorbing lubricant
• Lubrication of universal and constant velocity joints of front wheel drive vehicles and for slow and fast moving plain and anti-friction bearings

Colour: Black.

• 90g tube
• Store under cover with lid/tube closed, away from vibrating floor
• Remove excess from skin and wash with Spanjaard Hand Cleaner followed by soap and water

Wynn’s Grinding Paste is water based abrasive paste solution for asperity removal from metal surfaces. It is a dual package containing fine and coarse grit for professional results. Can be used to seat new valves, sharpen blades, remove score marks, lapping, tool making etc.

• Dual grit size package
• Provides lubrication while grinding
• Professional results in multiple application

White Lithium-based Grease aerosol lubricant sprays on like a fluid, then congeals to a grease for prolonged lubrication intervals. Effective lubrication and protection for automotive, domestic and light duty applications, including battery terminals, locks, hinges, latches etc.

• Resistant to water
• Prevents corrosion
• Temperature range from -150C to 1200C
• Excellent metal retention

Wynn’s Super Epoxy is a two-component, low viscosity, fast curing adhesive formulated to bond an extensive range of substrates including metal, ceramic, rigid plastic and wood. Applied in single action, this product cures with excellent adhesion and is extensively used in applications such as metal toys, automobile plastic panels, fuel tanks, bumpers, mirrors, electrical appliances and industrial oil tanks, transformers and radiators.

Applications

Bonds metal, ceramic, rigid plastic, wood as well as many other materials

Packaging

6 x 32ml

Wynn’s Steel Epoxy is a two-component, low odour, fast curing adhesive formulated to bond an extensive range of substrates including steel, brass, copper, iron, plastic, wood, concrete and ceramics. Applied in single action, this product cures with high bonding strength, resistance to high temperature, pressure and grease. Suitable for use to repair worn valve seats, cracked housings, copper and cylinder heads, gas tank, plumbing and radiator leaks, torn keyways, stripped threads, toys and furniture.

Applications

Bonds steel, brass, copper, iron, plastic, wood, concrete and ceramics

Packaging

6x 32ml

Wynn’s Coolant/ Antifreeze is a concentrate designed to meet old and modern vehicle requirements made from the finest Euro spec glycols, anti-corrosion and anti-foam agents to provide superior protection.

• Freezing Point at 40% dilution -25 degrees C (ASTM D1177)
• Wynn’s Coolant/Antifreeze meets ASTM D3306/D4985;
• SAE J-1034; British & Fed. Standards
• Protects cooling system from fouling
• Prevents corrosion
• Anti-foaming agent prevents cavitation and pitting

Applications

• Suitable for all radiator types from classics to modern aluminium core radiators
• The 1 Litre concentrate can be diluted with demineralised water as per vehicle's requirements

Directions

• Dilute contents as desired, then simply pour into the radiator filling reservoir until it is full
• Run the vehicle until normal operating temperature is reached
• Continue to top up while vehicle is idling until the full level is maintained
• It is recommended that all old coolant is flushed using Wynn’s Radiator Flush before replacing with new coolant
• Do not mix with OAT coolant

Packaging

12 x 1 Litre