Wynn’s Bright Spark is an intelligent electrical circuit and contact cleaner. Spray directly onto surfaces to be cleaned to restore good electrical contact. It will remove all dirt, flux and oily residue as well as remove moisture. Ideal for sensitive electronics, printed circuits, switches and electrical panels. Safe to use on most plastics, rubber and metal.

• Fast and convenient cleaning action
• Quick drying formula removes moisture
• Inhibits corrosion
• Extension tube facilitates easy spot cleaning in hard to reach areas
• Non-Flammable

Directions

• Spray directly onto surfaces to be cleaned          
• Insert extension tube to spot clean and reach into awkward areas          
• Warning: Test for compatibility before using on plastics

Packaging

12 x 200ml

Wynn’s Carb Cleaner is a powerful solvent which enables you to clean the carburettors without dismantling. Simply spray it into the float chamber vent to clean the inside and down the throat for rapid results. Spray onto the outside to clean the exterior.

Cleans without dismantling

Rapidly dissolves gums, resins, & tar deposits

Restores smooth idling & efficient fuel delivery

Applications

• Fuel starvation
• Dirt and gum in carb blocking jets
• Old oxidised fuel left in carburettor
• Starting problems

Directions

• Remove air filter
• Spray all exposed surfaces in carburettor throat               
• Start engine - spray into float chamber.
• Rev engine moderately
• Stop engine and spay-clean outside surfaces as required.            
• Adjust air fuel mixture and idle 

Packaging

12 x 500ml

12 x 285g

12 x 200ml

Wynn’s Engine Cleaner & Degreaser is a solvent based degreaser for heavy duty cleaning of engine parts and exterior. It lifts dirt, grime and oil off bikes, chains, quads, etc.

• Strong solvent action lifts dirt and grime as well as oil from fouled motor components
• Effective on the heaviest grease build-up
• Can be used in a high pressure sprayer
• Easy to use squirt bottle for convenient and efficient cleaning

Applications

• Cars, bikes, quads, trailers, bicycles, engine parts etc.
• Avoid solvent sensitive materials such as paintwork and soft plastics

Directions

• Use easy spray nozzle to apply to dirty area
• Brush or wipe away dirt with cloth
• Rinse off with water

Packaging

12 x 500ml

Wynn’s Engine Start is the easy solution to starting problems. Avoids wear of the starter motor and prevents battery drain. Engine start assists with cold weather starting, flooded engines and helps restore fuel pump pressure after a vehicle has run dry.

Unlike many starting fluids, Wynn’s Engine Start can be used in 4 stroke and 2 stroke engines as it contains a friction proofing lubricant.

• Fast acting starting solution
• 2 stroke engine safe
• Contains friction proofing
• For petrol or diesel engines

Applications

• Petrol or Diesel engines to promote easy starting
• Vehicles and motor bikes, especially if not in regular use
• Outboard motors and two stoke engines
• Mowers, chain saws, weed eaters etc.

Directions

• Hold can upright              
• Remove air filter for best results              
• Spray into air intake for a few seconds then crank engine            
• Repeat if necessary       

Packaging

12 x 200ml

12 x 375ml

Wynn’s Sensor Safe, High-Temp RTV is a one-component, room temperature vulcanizing gasketing compound with features of high stability and durability. Specifically designed to provide reliable formed-in-place gaskets for mechanical assemblies that withstand operating environments up to 3430C and resistant to engine oils, fuel and anti-freeze. This product is extensively used in bonding and sealing applications on automobile engines such as joint cover of tappet cover, intake exhaust manifolds, timing chain cover, oil sump, transmission pan, and household electrical appliances.

Packaging: 90ml

Wynn’s Throttle Body and Air Intake Cleaner will remove sticky residue, caused by oil mist crankcase fumes, from air intake system components as well as petrol residues, gums and resins. These tar like deposits build up on the idle speed control and butterfly valves leading to irregular airflow and erratic idling. Formulated for modern petrol vehicles, will not remove protective surface coatings and is O2/ Lambda sensor safe

Packaging: 285g

• Removes sticky air intake build up
• Restores correct airflow to improve air/fuel mixture
• Cleans contaminated EGR & idle speed valves
• Restores smooth idling & throttle response

A strongly adhesive, water repellent, penetrating lubricant for bike quad and other chain mechanisms. Non-conductive.

Packaging: 375ml

• Reduces friction and wear
• Performs through wide temperature range
• Resistant to dirt, water and corrosion
• Oil consistency

A specially formulated non-fling chain lubricant for high velocity chains. Non-conductive.

Packaging: 375ml

• Reduces friction and wear
• Performs through wide temperature range
• Resistant to dirt, water and corrosion
• Wax consistency

Charge for oil is a high mileage oil additive for the car with some wear and tear and using oil. A viscosity index improver prevents blow-by by maintaining oil viscosity throughout the temperature range preventing oil smoke. Anti-wear agents provide extra boundary lubrication protection reducing further wear of engine parts while quietening valve train and engine noise. Use in manual gearboxes and differentials or as an assembly lube, to ensure superior wear protection and smooth operation.

Packaging:          375ml

                             500ml

• Reduces oil consumption in engines with signs of wear
• Minimises exhaust smoke by providing better piston ring sealing
• Improves oil pressure to better protect moving parts
• Provides anti-wear protection to reduce further wear

Chilly Willy is a pre-mixed high performance inorganic coolant /antifreeze package for old and modern vehicles. Made from the finest Euro spec glycols, anti-corrosion and anti-foam agents to provide superior protection.

Freezing Point: -250 C (ASTM D1177)

ASTM D3306/D4985; SAE J-1034; British & Fed. Standards.

Packaging:          1L

                              2L

Penetrates and lifts oil, grease and stains, cleans stubborn dirt and grime in the household and workshop including kitchens, ovens, laundry stains, showers, toilets, work surfaces garages, tools, bikes, car under bonnet, braai’s and other tough cleaning jobs.

Packaging:      500ml

                        500ml (squeezer)

                        750ml

                        2L

                        2L Lemon

                        2L Lavender

• No bleach or ammonia
• Biodegradable
• Concentrated formula
• General purpose cleaner and degreaser

High quality heavy duty grease intended primarily for automotive universal joint application. Excellent adherence and high temperature characteristics ensure proper lubrication of moving parts at all times.

Packaging:          90g

• High resistance to water wash
• Excellent protection against rust and corrosion
• Long service life
• Good retention under shock loading

Diesel Treatment is the complete Diesel additive to maintain best performance in all conditions. Cleans Injectors, reduces soot emissions and keeps EGR and DPF systems clean with Cerium Technology, Biocide kills algae and micro-organisms, flow improver prevents diesel waxing to well below freezing point. Added lubricity extends injector life and lubricates fuel pump. Assists with water separation by demulsifying the fuel and water for easy and complete removal through the water trap.

Packaging:          500ml

• Cleans injectors, turbo, EGR valve and diesel particulate filter (DPF)
• Kills micro-organisms and algae associated with diesel tank contamination
• Lubricates injector increasing efficiency and extending injector life
• assists with water separation for complete removal of free water
• Prevents diesel freeze and filter clogging in cold temperature environment
• With Cetane Enhancer

Superior flushing fluid additive to be used before an oil change. Wynn’s Engine Flush, is fast acting and provides extra wear protection while dissolving sludge and oil deposits with a unique anti-wear additive. Flush after just 15 minutes or continue activation for up to 200km’s while you drive. Engine Flush will remove sticky deposits from the pistons rings restoring compression as well as clean out oil channels and galleries to ensure complete lubrication of all working components when oil is replaced.

Packaging:          375ml

• Cleans engines internally while providing anti-wear protection
• Frees sticky piston rings, hydraulic valve lifters, and variable timing systems
• Removes lacquer, varnish & sludge deposits from the crankcase
• Restores compression

This seal rejuvenator and viscosity index improver has a dual acting stop leak action. While swelling dry and hardened rubber/ neoprene seals and O-rings to stop oil leaks, the viscosity index improver prevents oil from thinning at high temperature and seeping past the rings causing blow-by smoke. Excellent for restoring valve stem seals.

Packaging:          375ml

• Reduce oil burning and exhaust smoke
• Reduce unsightly leaks from camshaft and crankcase oil seals
• Ideal for use in used car preparation

Wynn’s Gear Oil Treatment and Assembly Lube, is a fully supplementary gear oil package scientifically formulated using the latest technology to provide all the below listed gear box, differential and wide variety of automotive and industrial equipment. Formulated to meet international vehicle manufacturer’s specifications of extreme pressure gear oils and recommended for use in limited slip differentials.

Packaging:          90g

• Reduces gear friction & wear extending component life
• Provides oxidation & shear stability for longer oil life
• Quietens diff & manual gearbox whine providing smoother gear changes
• Anti-Wear & Extreme Pressure additives provide excellent protection during engine rebuilds & component assembly

Wynn's Hydraulic Valve Lifter Concentrate is an oil soluble supplement designed to restore efficient working of hydraulic valve lifters.

Packaging:          PN 76841 – 24x325 ml – NL/FR/DE/IT/DA/NO/HU

PN 76844 – 24x325 ml – EN/ES/RU/SV/FI

• Releases sticking valve stems and hydraulic valve lifter components.
• Quietens valve train noise.
• Dissolves dirt, gum and varnish deposits in the oil channels.
• Contains EP agents for extra protection.
• Does not harm catalytic converters.
• Compatible with all mineral, synthetic, single- and multigrade oils and suitable for regular and low SAPS applications.

A multi-purpose penetrating lubricant for chains, hinges locks, castors, fishing reels, tools etc. Excellent rust penetrating properties when used as a de-gripping agent.

Packaging:          200ml

                                375ml

• Silicone free multi-purpose lubricant
• Rust penetrant
• Dissolves and cleans tar, grease and sticker residue
• Protects against corrosion
• Repels Water

Wynn's Oil System Cleaner is an oil soluble supplement cleaning and protecting the oil circulation system and preventing contamination of fresh oil by residues left behind.

Packaging:          325 ml

• Dissolves sludge, dirt and deposits in the crankcase, the oil ducts and all parts in the oil circulation system.
• Keeps the dissolved impurities in suspension and prevents their agglomeration.
• Frees piston rings and hydraulic valve lifters.
• Avoids contamination of fresh oil by residues left behind.
• Prolongs the lifetime of the new oil due to the cleaning procedure.
• Contains EP additives for additional protection against wear during the treatment.
• Does not harm catalytic converters.
• Compatible with all mineral and synthetic engine oils and suitable for regular and low SAPS applications.

Designed to dissolve high temperature petrol deposits on the injector pintle, keeping injectors clean and lubricated. Removes water from the fuel system, restores efficient fuel delivery and is safe to use with all fuel system components including high pressure direct injection, catalytic converters and O2/ lambda sensors.

Packaging:          375ml

• Reduces exhaust smoke caused by incomplete fuel combustion
• Removes injector pintle deposits restoring fuel flow and optimum fuel atomisation
• Improves fuel economy and overall engine performance

<iframe width="560" height="315" src="https://www.youtube.com/embed/9P96_LcfSoQ" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen></iframe>