Applications
- Fixes appliances, plastics, automotive interior and exterior as well as cracks in metal components.
Directions
1. Make sure the surfaces to be bonded are clean and dry (preferable to solvent-wipe plastics , glass, and rubber, and to acid-treat metals).
2. Dispense a drop or drops to one surface only. Apply only enough to leave a thin film after compression.
3. Press parts together and hold firmly for a few seconds. Good contact is essential. An adequate bond develops in less than one minute. (Maximum strength is achieved in 24 to 48 hours).
4. Wipe off excess adhesive from the top of the container and recap Liquid Filler Repair Kit if left uncapped, may deteriorate by contamination from moisture in the air.
5. Because Liquid Filler Repair Kit polymerises on contact with moisture surfaces, sometimes a whitening will occur on the surface of the container or the bonded materials. Should this happen, wipe surfaces well with acetone
Packaging
6 x 20ml
