Functions

• Backlit user friendly interface and display.
• Adapts automatically to the size of your battery.
• A meter to easily read the actual power level of your battery.
• Integrated cable management.
• It will never over-charge your battery.
• Temperature compensated charging cycle.

• Simple and user-friendly interface and display
• Automatically adapts charging to your battery
• Built-in Power supply mode
• Battery status monitoring in the display
• Secured against short-circuiting and reverse polarity
• Integrated cable storage solution
• Will not overcharge your battery
• Temperature compensated charging

• Simple and user-friendly interface and display.
• Automatically adapts charging to your battery.
• Built-in Power supply mode.
• Battery status monitoring in the display.
• Secured against short-circuiting and reverse polarity.
• Integrated cable storage solution.
• Will not overcharge your battery.
• Temperature-compensated charging.

Use

Well suited for battery sizes up to approximately 500Ah. It can maintenance charge batteries indefinitely and handle parallel consumption up to 30A while charging. The charging voltage is temperature compensated with an external sensor.

14,7 V

Some batteries require a higher charging voltage than others (this is described son the battery). Press the 14.7V button, and the initial charging voltage will be 0.3V above than the standard level.

Power supply mode

When you need continuous current and stable voltage during ECU programming or battery replacement, you can use our workshop chargers as a power supply. Activate Powersupply-mode by holding the “ON” button until the display begins to light up in sequence.

• Test battery CCA, voltage, internal resistance, health and charge
• Test cranking and charging(alternator) systems
• Review history record
• Display test result: good battery, good battery & recharger, charge &retest, replace, bad cell & replace
• Support all battery standards, like JIS, DIN, IEC, EN, SAE, CA, CCA, GB, BCI, MCA
• Protection of short circuit and reverse connection
• All results can be shared and printed out
• Waterproof IP65
• Portable small size, easy to carry
• Fireproof shell and wire

Before use it is necessary to upload the APP to your phone either iPhone or Android as below:
1. iPhone – BT1000, App store
2. Android- BT1000, Google Play

• Bluetooth name: BT1000
• No password, automatically connect.

Download The Manual Here

Bluetooth name: BT1000
No password, automatically connect.
Operating Temperature: -15 to 100 Degrees Celsius
Plastic: Automotive Grade
Physical Dimensions: 54 x 35 x 10 mm

The Hawkins Autopro 35 is a three stage temperature compensated fully automatic microprocessor controlled units. The three charging stages are identified as Bulk, Absorption and Float. These chargers are suitable for charging all types of Lead / Calcium-, Flooded-, Maintenance Free-, Sealed-, Gel and AGM (Absorbent Glass Mat) batteries.

During the first charging stage, a constant current is applied replacing the bulk of the battery energy. During the second charging stage, the battery terminal voltage is held constant while the charging current reduces to a minimum and the final energy is absorbed by the battery. After the battery has been fully replenished the charger will switch to the last stage maintaining the battery terminal voltage at the float point indefinitely.

Rated Input Voltage : 230 Vac

Rated Output Voltage : 12 Vdc

Rated Output Current : 35 Adc

Weight: 11,5 Kg

Size: 230 x 220 x 285

• Test battery & charging/starting systems
• The latest testing results save automatically and reviewed
• Adjustable date/time, printing mode
• Print via built-in printer
• One-click function key --> shortcut for 2 quick function including voltmeter and quick test
• Test battery CCA, voltage, internal resistance, health and charge
• Display test result: good battery, good battery & recharge, charge & retest, replace, bad cell & replace
• Protection of short circuit and reverse connection

• Work on 12V vehicle and motorcycle batteries
• Test battery & charging/starting systems
• The latest testing result save automatically and reviewed
• Print function via PC printer
• One-click function key -shortcut for 2 quick function including voltmeter and quick test
• Test battery CCA, voltage, internal resistance, health and charge
• Protection of short circuit and reverse connection

• Easy-to-read, color-coded float indicates battery charge

• Rubber bulb and acid-resistant rubber tip

Extended test mode: Tests can be conducted on a wide variety of batteries, including 12 V and 24 V starter and charging system

Even more accurate tests results due to optimal amp clamp upgrade

Test algorithms are optimised, allowing for new batteries or never installed batteries to be tested.

Load-free test procedure: Produces fast, precise and reliable measurement results

Large LCD screen

Integrated printer for immediate, clear and easy to understand graphical printouts

Can store up to 100 test reports to maintain history of service records for future communication with customers

Keep software up-to-date trough USB port

Connection cable is 3 m long, to allow for maximum coverage around the vehicle

Only weighs 700 g to enable one hand use

Battery nominal voltage: 6 V / 12 V

Application: Passenger Car / commercial vehicle, motorcycle, marine

Battery types: Lead-acid, gel & AGM

Test standards: JIS, EN, DIN, SAE, IEC, EN2

Battery size (in acc. with CCA): 100 - 2000 A

Starting/charging system test: 12 V / 24 V

Menu languages: 21

Dimensions (W x H x D): approx. 270 x 113 x 50 mm

Weight approx.: 700 g

Operating temperature: 0 °C - 40 °C

The Brighter, Tougher, Taller Stand Light – M18™ ROCKET™ LED Tower Light is designed to give professionals an area lighting solution that adapts, performs, and survives industrial use unlike any other portable work light.  The 2130-20 can be setup in seconds with its max extension 7’ high, and it collapses down to 40” for easy transport and storage.  The light head can be extended from 4-7’ to light overhead work or minimize shadows when casting light downward.  Capable of filling large areas with light, it provides 2,000 lumens of high definition light output for in its high mode, 1,300 in medium and 850 in low, and it can run for up to 4, 6, or 10 hours with an M18™ REDLITHIUM™ XC 5.0 Battery Pack. It uses high quality LEDs with a neutral white color and a high color rendering index paired with a Milwaukee® designed reflector to produce an even beam pattern.    Its reinforced legs are impact resistant, and its low center of gravity provides a stable base.   The light head is protected by an impact-resistant lens and bezel, and it nests into a protective shroud for secure transport and storage.  Its LEDs never need to be replaced, and are backed by a limited lifetime warranty.  The combination of these technologies offers professionals the highest quality LED lighting solution, on or off the jobsite.

• TRUEVIEW™ high definition lighting
• 180° - 360° adjustable beam - versatile design, allows the user to select between area lighting and task lighting
• Best-in-class performance - unmatched light output 700 Lumens, designed to illuminate large areas
• High powered USB charger charges tablets, smart phones, MP3 players and other electronic devices
• Job site durability - rugged designed with impact resistant lens to withstand abusive job site conditions
• 4 light settings - provides 700 Lumens on High & Strobe (100%), 350 Lumens on Medium (50%), 70 Lumens on Low (10%)
• 2 hooks for hanging

• TRUEVIEW™ high definition lighting
• Pivoting head provides 1250 Lumens with up to 650 m beam distance
• 4 output modes: Spot, Flood, Spot/Flood, Strobe delivering multiple options in work space illumination
• Spot mode for long range identification: utility pole/high voltage cable inspection, inspection of long runs of conduit, cast or copper pipe, under ground work, bridge work...
• Flood mode for illuminating close work spaces
• IP54 rating, the light is protected from dust and splashing water
• Ergonomic grip with rubber overmould enhances user comfort and grip during use

Actual Power : 15W
Certificate:CE, RoHS, IP67, IP69K, Emark
Operating Voltage: 10-30V DC
Effective Lumen:1210 lm
Current Draw: 1.25A@12V, 0.625A@24V
Color Temperature:6000K
Optional Beam: Narrow 30°

The Milwaukee TRUEVIEW™ High Definition Lighting Tower is designed to provide powerful, durable, and versatile lighting for various job site conditions.

TRUEVIEW™ High Definition Lighting: Offers clear, high-quality illumination with true colour representation.

High Performance LEDs: Equipped with twelve LEDs delivering up to 2800 lumens on high output, ensuring excellent visibility in dark workspaces.

Adjustable and Impact Resistant Head: The light head, made of durable polycarbonate, can be rotated 230° vertically and pivoted 240° horizontally to direct light exactly where needed. The protective guard secures the head and lens when collapsed for storage or transport.

Extendable Mast: Extends from 1.10 m to over 2.20 m, allowing light to be projected from above to minimize shadows in the workspace.

IP54 Rated Protection: Dust and splash-proof design ensures reliable performance in tough conditions.

Durable and Stable Construction: Features a compact footprint with a low centre of gravity and impact-resistant reinforced nylon legs for stability on uneven surfaces.

Easy Transport: Carry handles in two positions provide balanced weight distribution for convenient one-handed transport.

Low battery indicator - light flashes when battery pack is low

Flexible battery system: works with all MILWAUKEE® M18™ batteries

Max. light output high / medium / low / strobe (lumens): 2800/ 1300/ 860

Max. run time with M18 B5 battery (h): 4.5/ 8.5/ 13.5

Weight with battery pack (EPTA): 7.6 kg (M18 B5)

NOT included: batteries, charger, kitbox / bag