Convenient aerosol application for use on slides, guides, chains, linkages and other hard-to-reach areas. Protection against metal-to-metal contact giving longer machine life and greater productivity. Excellent anti-corrosion and adhesion properties inhibits metal rusting under humid conditions.

Directions for use: Shake well before use. Spray liberally onto areas to be treated. Wipe away any excess with a cloth. Reapply as required.

Appearance: Soft, white, tacky grease

Thickener: Bentonite

Working Temperature: -20 °C to 160 °C

Drop Point, °C: No drop point

Rust Test, D1743: Pass

1.8x1.2x900

Manually operated sockets with thin walls and knurled bases

CHROME VANADIUM steel 31CrV3

Chrome plated and polished

For Similar DIY Tools, Please Click Here

Manually operated sockets.

Knurled base.

Contact drive profile (CD) has even wave contour.

With CD turning force is applied to the flanks of the bolt resulting in a more even distribution of force.

Fits bolt heads outside the greater contact area.

Also suitable for slightly damaged bolt heads.

Does not damage the bolt head as there is no force on the edges.

Chrome vanadium steel 31CrV3.

Chrome plated and polished.

Supplied in blue powder coated steel case with matt black finish insert.

For Similar DIY Tools, Please Click Here

Spanjaard FMG-X White Multi-Purpose Grease (Food Grade) is recommended for the general lubrication of equipment in food and beverage processing plants, including bushes, bearings and other machine parts. Although designed for incidental food contact applications, the excellent lubricating properties allow use in a variety of other applications, allowing rationalisation of lubricants. Provides very good water resistance properties which protect equipment against rusting especially in humid seasonally in-operative plants. Anti-wear additives protect against metal-to-metal contact giving longer machine life and greater productivity.

Directions for use: Apply by hand or grease gun. If replacing a non-bentonite-thickened grease, flush out old grease completely when switching lubricants. This is achieved by frequent re-greasing over a short time span.

NLGI Consistency: 1.5

Worked Penetration, 25°C, 1/10mm: 285 – 325

Colour: White

Thickener: Bentonite

Working Temperature, °C: -20 °C to 160 °C

Drop Point, °C: No drop point

Rust Test, D1743: Pass

Copper corrosion: 1b

4-Ball Weld Load (kgf): 500kgf

Oil Separation (1000C, 30hrs): 3%

A cold zinc galvanising spray containing 95% purity zinc. Provides protective final coating on primer whenever iron or steel will be exposed to corrosive conditions. Restoration of galvanised steel roofing. Agricultural machinery, air conditioning units, fences, marine equipment, boat house, metal floors & roofs, mining equipment, oil rigs and off-shore drilling structures. Railroad equipment, structural steel tanks, transmission towers. Underground pipe lines, ducts, automotive bodies. Eliminates corrosion on weld and previously galvanised surfaces.

Colour: Silver

• 400ml aerosol
• Store under cover below 50°C and away from direct sunlight
• Do not puncture or incinerate can
• Do not spray onto naked flame or incandescent material
• Use in well ventilated area
• Keep out of reach of children

Excellent assembly lubricant where elastomers and plastic materials move against metal.

Lubrication of plastic gears, mechanisms, O-rings, gaskets, valves and seals as well as surfaces that require good lubrication properties over extended periods without drying out

Seals electrical equipment against the ingress of moisture, and protects metal parts against corrosion

Acts as a release agent in the rubber & plastics industries

Apply by hand or grease gun

Consistency – NLGI grade: 2

Worked Penetration, 25°C , 1/10mm: 275

Colour: White translucent

Thickener: Silica

Drop Point, °C: No Drop Point

Evaporation Loss 30hrs @ 200°C ,%: 2.0

Cold Temperature Stability (-50oC): Conforms

Dynamic Rust Test :<1

Copper Corrosion – 24hr/100°C: Pass

Oil Separation 30h @ 200°C ,%: 4.0

Water Wash Out @ 93°C ,%: 1

Timken OK Load, kg: 1

Oxidation Resistance, D942,%>: 1

Dielectric strength, kV/mm: 15

Working Temperature, °C: -40 °C to 200 °C