including 2 keys

Universal design which is suitable for most cars.
Protects your car interior.
Can be removed easily for washing or vacuuming purposes.
Washable and easy to clean.

Universal design which is suitable for most cars.
Protects your car interior.
Anti-slip backing
Easy to clean

Convenient aerosol application for use on slides, guides, chains, linkages and other hard-to-reach areas. Protection against metal-to-metal contact giving longer machine life and greater productivity. Excellent anti-corrosion and adhesion properties inhibits metal rusting under humid conditions.

Directions for use: Shake well before use. Spray liberally onto areas to be treated. Wipe away any excess with a cloth. Reapply as required.

Appearance: Soft, white, tacky grease

Thickener: Bentonite

Working Temperature: -20 °C to 160 °C

Drop Point, °C: No drop point

Rust Test, D1743: Pass

Spanjaard FMG-X White Multi-Purpose Grease (Food Grade) is recommended for the general lubrication of equipment in food and beverage processing plants, including bushes, bearings and other machine parts. Although designed for incidental food contact applications, the excellent lubricating properties allow use in a variety of other applications, allowing rationalisation of lubricants. Provides very good water resistance properties which protect equipment against rusting especially in humid seasonally in-operative plants. Anti-wear additives protect against metal-to-metal contact giving longer machine life and greater productivity.

Directions for use: Apply by hand or grease gun. If replacing a non-bentonite-thickened grease, flush out old grease completely when switching lubricants. This is achieved by frequent re-greasing over a short time span.

NLGI Consistency: 1.5

Worked Penetration, 25°C, 1/10mm: 285 – 325

Colour: White

Thickener: Bentonite

Working Temperature, °C: -20 °C to 160 °C

Drop Point, °C: No drop point

Rust Test, D1743: Pass

Copper corrosion: 1b

4-Ball Weld Load (kgf): 500kgf

Oil Separation (1000C, 30hrs): 3%

A cold zinc galvanising spray containing 95% purity zinc. Provides protective final coating on primer whenever iron or steel will be exposed to corrosive conditions. Restoration of galvanised steel roofing. Agricultural machinery, air conditioning units, fences, marine equipment, boat house, metal floors & roofs, mining equipment, oil rigs and off-shore drilling structures. Railroad equipment, structural steel tanks, transmission towers. Underground pipe lines, ducts, automotive bodies. Eliminates corrosion on weld and previously galvanised surfaces.

Colour: Silver

• 400ml aerosol
• Store under cover below 50°C and away from direct sunlight
• Do not puncture or incinerate can
• Do not spray onto naked flame or incandescent material
• Use in well ventilated area
• Keep out of reach of children

Excellent assembly lubricant where elastomers and plastic materials move against metal.

Lubrication of plastic gears, mechanisms, O-rings, gaskets, valves and seals as well as surfaces that require good lubrication properties over extended periods without drying out

Seals electrical equipment against the ingress of moisture, and protects metal parts against corrosion

Acts as a release agent in the rubber & plastics industries

Apply by hand or grease gun

Consistency – NLGI grade: 2

Worked Penetration, 25°C , 1/10mm: 275

Colour: White translucent

Thickener: Silica

Drop Point, °C: No Drop Point

Evaporation Loss 30hrs @ 200°C ,%: 2.0

Cold Temperature Stability (-50oC): Conforms

Dynamic Rust Test :<1

Copper Corrosion – 24hr/100°C: Pass

Oil Separation 30h @ 200°C ,%: 4.0

Water Wash Out @ 93°C ,%: 1

Timken OK Load, kg: 1

Oxidation Resistance, D942,%>: 1

Dielectric strength, kV/mm: 15

Working Temperature, °C: -40 °C to 200 °C