4 Functions:

   • Ball joint service

   • Universal joint service

   • Truck brake anchor pin service

   • 4 Wheel drive ball joint service

This tool set has four functions: removal / installation of ball joints, universal joints, truck brake anchor pins and 4WD ball joints. Both ball joint service and 4WD ball joint service can be implemented without having to take off the control arm. Universal joint service can be utilized on U-joints with needle type bearings. Truck anchor pin service can be used with pins up to 1-1/4″ in diameter. 4WD ball joint service equipment broadens the application to include vehicles with Dana 44 front axles such as 1967 to current 1/2 Ton and 3/4 Ton GM, Ford, Dodge, IHC and Jeep 4WD vehicles. For press-fit automotive components.

• Heat-treated, durable steel with black oxide finish to resist corrosion

• Specially designed for 1 or 2 step models, fitting various flute designs on Fram, AC, Casite, Lee, Hastings, Motorcraft, NAPA, Purolator, STP, Pure One, Wix, as well as some Japanese and European made filters

• Use with 3/8″ Dr. ratchet

• Oil filter manufacturer’s reference table included

• Designed to make disc brake services faster & engery saving

• The kit includes 19 adapters which fit a variety of modern car brands

• To wind back brake piston to remove and install new brake pad

• With positive and negative thread for more car models

• Application: Audi, VW, BMW, Mercedes, Ford, GM, Honda, Toyota, Nissan, Land Rover

Contents:

• 2-1/2" single pin disc - General Motors, Vauxhall

• Plate

• 2-1/64" disc plate - Citroen

• 2-5/32" three pin disc - Audi, Alfa Romeo, Audi, Rover, BMW, Ford, Honda, Jaguar, Mercedes, Mitsubishi, MG, Nissan, Rover, Toyota, Volkswagen, Volvo

• 1-1/4" no pin disc - Alfa Romeo, Ford, Mazda, Peugeot, Honda, GM, Saab, Seat, Skoda, Subaru, Vauxhall, Volkswagen, Volvo

• 3/8" Adaptor

• 1-21/32" two pin disc - Audi, Nissan, Volkswagen

• 1-21/32" two pin disc - Audi, Rover, Subaru, Ford, Honda, Nissan, Peugeot, Rover, Saab, Seat, Skoda, Toyota, Vauxhall, Volkswagen

• 1-7/8" single pin disc - GM, Opel,Vauxhall

• 2-1/8" single pin disc - GM, Opel, Vauxhall

• 1-3/16" two pin disc - Citroen, Fiat, Peugeot, Renault

• 1-21/32" four pin disc - Nissan

• 1-1/4" two pin disc -Opel, Vauxhall Left Hand Spindle

• 2-1/18" two pin disc - Citroen

• 1-1/4" two pin disc - Ford

• 1-1/4" hex disc - Saab, Honda

• Right Hand Spindle

• Plate

• 2-1/8" two pin disc

• 1-25/32" two pin disc

Installs to the side profile of your Front Runner Slimline II Roof Rack.

Swings out 90 degrees from the side of the rack, allowing your water tap to clear the side of your vehicle.

The spring pin locks the extension bracket in a closed or opened position.

Features a shower head holder.

Consists of:

• 1 x Tap Extension Bracket
• Installation Hardware
• Fitting Instructions

Materials used: Black powder coated high strength steel

Product Dimensions: 315mm (12.4") L x 187mm (7.4") W x 73mm (2.9") H

Weight: 1.3kg (2.9lbs)

The adjustable stainless steel latch with safety catch holds your Jerry Cans firmly in place over a lifetime of off-road abuse.

For use with 20l / 5.3 gallon NATO/Wedco style military cans.

This strap covers the Jerry can caps. Add your own cable lock or Rack Accessory Lock / Small and you'll never have to worry about stolen fuel while on the road.

Made of black powder coated high strength steel and designed to easily bolt to the Front Runner Roof Racks using the flat slotted slats in the rack.

Note: Not suitable for Scepter Style containers.

Consists of: 1x Strap Assembly, 1x Base, 2x Catches, Installation Hardware, Fitting Instructions

Material: Black powder coated high strength steel

Dimensions (LxWxH): 513 x 333 x 371 mm

Weight: 4.3 kg

The adjustable stainless steel latch with safety catch holds your Jerry Cans firmly in place over a lifetime of off-road abuse.

For use with 20l / 5.3 gallon NATO/Wedco style military cans.

This strap covers the Jerry can caps. Add your own cable lock or Rack Accessory Lock / Small and you'll never have to worry about stolen fuel while on the road.

Made of black powder coated high strength steel and designed to easily bolt to the Front Runner Roof Racks using the flat slotted slats in the rack.

Note: Not suitable for Scepter Style containers.

Consists of:   1x Strap Assembly, 1x Base, 1x Catch, Installation Hardware, Fitting Instructions

Material: Black powder coated high strength steel

Dimensions (LxWxH): 513 x 165 x 370 mm

Weight: 2.4 kg

The Shower Arm unhooks easily from the base and folds in half, compact, to be stored under a car seat or inside a Front Runner Wolf Pack, etc.

Mounts anywhere off the side of a Front Runner Roof Rack.

Please Note: This product is not compatible with Frontrunner Slimsport rack kit range.

Materials used:

2.5mm (0.098") black powder coated stainless steel

Lightweight and can carry up to 20l (5.28 gallons) of water suspended from the roof rack

Consists of: Lower shower arm, upper shower arm and a nuts and bolts kit

Product Dimensions: 530mm (L) x 120mm (W) x 90mm (H)

Weight: 2kg

Maximum Load Capacity: 25kg