Specially formulated for limited-slip differentials: Racing cars, 4WD, Passenger cars, forester and construction vehicles.

All types of hypoid differential with or without limited-slip system operating under shocks, heavy loads and low revolution speed or moderate load and high revolution speed.

For BMW rear axles with limited-slip differential, use MOTUL HYPO SYNT LS 75W-140.

Mineral special hypoid gear oil with stick-slip additives for locking differentials. Reduces friction even under extreme operating conditions. 

Application: Transmission Lubricants

Quality: Mineral

Product Range: Car, Motorcycle

API Standards API GL-4, API GL-5

Capacity: 2 litres

100% Synthetic High Performance low viscosity lubricant specially engineered for modern automatic transmission (manual mode, sequential mode, electronically controlled …) with or without slip lockup clutch requiring a DEXRON VI fluid.

Particularly recommended for use in automatic gearboxes, transfer case and power steering systems of American car makers GM, FORD, CHRYSLER… Asian car makers HONDA, HYUNDAI, KIA, ISUZU, MERCEDES, MITSUBISHI, NISSAN, TOYOTA... or European car makers FORD, OPEL…

Also suitable for use in older automatic gearboxes, torque converters, power steering, mechanical and hydraulic systems where DEXRON III H or DEXRON II D fluids are required.

Before use always refer to the owner manual or handbook of the vehicle.

Application: Transmission Fluids

Quality: 100% Synthetic

Product Range: Car

Capacity: 1 litres

100% Synthetic High Performance low viscosity lubricant specially engineered for modern automatic transmission (manual mode, sequential mode, electronically controlled …) with or without slip lockup clutch requiring a DEXRON VI fluid.

Particularly recommended for use in automatic gearboxes, transfer case and power steering systems of American car makers GM, FORD, CHRYSLER… Asian car makers HONDA, HYUNDAI, KIA, ISUZU, MERCEDES, MITSUBISHI, NISSAN, TOYOTA... or European car makers FORD, OPEL…

Also suitable for use in older automatic gearboxes, torque converters, power steering, mechanical and hydraulic systems where DEXRON III H or DEXRON II D fluids are required.

Before use always refer to the owner manual or handbook of the vehicle.

Application: Transmission Fluids

Quality: 100% Synthetic

Product Range: Car

Capacity: 20 litre

Tandem heavy duty Torx VX225 mower, suitable for Commercial use

• Engine Power – Torx Petrol VX225 Petrol Engine 7hp, OHV, Industrial Spec
• Width of Cut – 520mm heavy duty steel deck
• Adjustable height by setting wheel heights
• Large diameter, four wheeler
• Swivel front wheels
• Heavy Duty Construction
• Reinforced Handle Bars
• Blade disc and swing blades with 3 blades

- Non-Slip, EVA Foam Top Mat

- Heavy Duty Double Wall Construction for Strength

- Ball Bearing Drawer Slides for Smooth Gliding

- Sturdy Stainless Steel Side Handle

- Dual Front Handles for Easy Pull Out

- Central Locking System with Cylinder Lock

- TPR Swivel Casters

Content: 

A.  67pc 1/4″ Dr. Socket Set (Metric)
Contents:
- 13x 1/4″ Dr. 6pt Sockets: 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10 ,11, 12, 13, 14mm
- 7x 1/4″ Dr. 6pt Deep Sockets: 6, 7, 8, 10, 11, 12, 13mm
- 1x 1/4″ Dr. Quick-Release Offset Ratchet
- 2x 1/4″ Dr. Extension Bar: 2″ (50mm), 6″ (150mm)
- 1x 1/4″ Dr. Sliding T Handle: 4-1/2″ (115mm)
- 1x 1/4″ Dr. Universal Joint
- 1x 1/4″ Dr. Go- Thru Spinner Handle
- 1x 1/4″ Dr. 1/4″ (6mm) Bit Holder
- 22x 1/4″ Screwdriver Bits(25mm):
     3x Phillips: #1, #2, #3,
     6x Slotted: 3, 4, 5, 5.5, 6, 7mm
     3x Hex: 4, 5, 6mm
     3x Pozi: #1, #2, #3,
     6x Star: T15, T20, T25, T27, T30, T40,
     1x Adaptor
- 9x “L” Type Hex Key Wrenches: 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10mm
- 9x “L” Type Star Sky Wrenches: T10, T15, T20, T25, T27, T30, T40, T45, T50

B. 28pc 3/8″ Dr. Socket Set (Metric)
Contents:
- 14x 3/8″ Dr. 6pt Sockets: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22mm
- 6x 3/8″ Dr. 6pt Deep Sockets: 7, 8, 9, 10, 11, 12mm
- 1x 3/8″ Dr. Quick-Release Offset Ratchet
- 1x 3/8″ Dr. Sliding T-Handle: 8″(200mm)
- 2x 3/8″ Dr. Extension Bars: 3″(75mm), 6″(150mm)
- 1x 3/8″ Dr. Universal Joint
- 2x 3/8″ Dr. Spark Plug Socket: 16mm, 21mm
- 1x 1/2″ (F) x 3/8″ (M) Lighted Extension w/ 3/8″ (F) x 1/2″ (M) Adaptor

C. 26pc 1/2″ Dr. Socket Set (Metric)
Contents:
- 18x 1/2″ Dr. 6pt Sockets: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 27, 30, 32mm
- 4x 1/2″ Dr. 6pt Impact Sockets: 17, 19, 21, 22mm
- 1x 1/2″ Dr. Quick-Release Offset Ratchet
- 1x 1/2″ Dr. Universal Joint
- 2x 1/2″ Dr. Extension Bars: 5″(125mm), 10″(250mm)

D. 22pc 1/2″ Dr. Star Bit Socket & External Star Socket Set
Contents:
- 9x 1/2″ Dr. 55mm Star Bit Sockets: T20, T25, T27, T30, T40, T45, T50, T55, T60
- 10x 1/2″ Dr. 55mm Hex Bit Sockets: 4, 5 ,6, 7, 8, 10, 12, 14, 17, 19mm
- 4x 1/2″ Dr. 100mm Hex Bit Sockets: ,6, 7, 8, 10mm

E. 16pc Combination Wrench Set (Metric) 
Contents:
- 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16 ,17, 18, 19, 22, 24mm

F. 12pc 1/2″ Dr. Deep Socket & Combination Wrench Set (Metric) 
Contents:
- 8x 1/2″ Dr. 6pt Deep Sockets: 12, 13, 14, 15, 16, 17, 18, 19mm
- 4x Combination Wrenches: 27, 28, 30, 32mm

G. 5pc Snap Ring Pliers & Locking Pliers Set
Contents:
- 1x 7″ (180mm) Straight Nose Internal Pliers
- 1x 7″ (180mm) Bent Nose Internal Pliers
- 1x 7″ (180mm) Straight Nose External Pliers
- 1x 7″ (180mm) Bent Nose External Pliers
- 1x 10″ (250mm) Lock Grip Pliers

H. 4pc Professional Pliers Set
Contents:
- 1x 8″ (200mm) High Leverage Nose Pliers
- 1x 8″ (200mm) High Leverage Combination Pliers
- 1x 6″ (150mm) High Leverage Cutting Pliers
- 1x 10″ (250mm) Quick-Release Water Pump Pliers

I. 11pc Precision Screwdriver, Pliers & Pick Tool Set
Contents:
- 1x 6″ (150mm) Mini Diagonal Cutting Pliers
- 1x 6-1/2″ (165mm) Mini Long Nose Pliers
- 2x Precision Slotted Screwdrivers: 2.4 x 75mm, 3 x 75mm
- 2x Precision Phillips Screwdrivers: #0 x 75mm, #1 x 75mm
- 1x Strong Magnet Pocket Pick-Up Tool
- 1x 110mm Straight Hook
- 1x 110mm Offset 45° Hook
- 1x 110mm 90° Hook
- 1x 110mm 135° Hook

J. 7pc “XTRO Soft” Pro Screwdriver Set (Phillips & Slotted)
Contents:
- 5x Slotted Screwdrivers: 3 x 60mm, 4 x 80mm, 5.5 x 125mm, 6.5 x 150mm, 8 x 150mm
-  2x Phillips Screwdrivers: #1 x 80mm, #2 x 100mm

K. 9pc Professional File & Diamond Needle File Set
Contents:
- 1x 8″ 200mm Medium Flat File
- 1x 8″ 200mm Medium Round File
- 1x 8″ 200mm Medium Three-Square File
- 1x 8″ 200mm Medium Half-Round File
- 5x Diamond Needle Files (5 x 180mm)

L. 7pc Hammer, Punch and Chisel Set
Contents:
- 1x Pin Punch 5 x 10 x 180mm
- 1x Pin Punch 6 x 10 x 180mm
- 1x Center Punch 4 x 10 x 120mm
- 1x Taper Punch 6 x 10 x 120mm
- 1x 16 x 250mm Cold Chisel
- 1x 300g Engineer’s Hammer
- 1x 680g Dead Blow Hammer

- Dimensions: 666 (W) x 459 (D) x 885mm (H)

- 2 small Drawers: 569 (W) x 410 (D) x 75mm (H)

- 3 medium Drawers: 569 (W) x 410 x (D) x 101mm (H) 

- 1 large Drawer: 569 (W) x 410 (D) x 154mm (H)

Grid included

Fits number 2 and 3 3-legged potjie pots

Material: Mild Steel

Size: 29 x 290 x 250 mm