Manual Transmission Fluid

Quality: Technosynthese

Viscosity: 75W-90

API Standards: API GL-5, API GL-4, MIL-L 2105 D

Specially recommended for gearboxes that are hard to shift and/or noisy.

Suitable for all types of mechanical transmissions.

Compatible with both synchronised and non-synchronised gearboxes.

Applicable to gearbox/differential systems, transfer gearboxes, and hypoid differentials without limited slip systems.

Designed for systems operating under shocks, heavy loads, and low revolution speed.

Also effective for moderate loads and high revolution speed scenarios.

High performance synthetic Technosynthese® lubricant specially engineered for Dual Clutch Transmission (DCT) gearbox type.

Suitable for use in a wide range of vehicles fitted with DCT gearboxes featuring Double-Dry Clutch Transmission and Double-Wet Clutch Transmission design.

Especially suitable for Dual Clutch Transmission (DCT) supplied by ZF, GETRAG or BORG WARNER and used by the main car manufacturers: VW-AUDI-SEAT-SKODA (DSG or S-tronic), BMW (DKG), PORSCHE (PDK), FORD (Powershift), OPEL (DSG), PSA Peugeot-Citroën (DCS), RENAULT (EDC, DC4), NISSAN (GR6), ….

MOTUL MULTI DCTF is not suitable for some mechanical gearboxes requiring gear oil with very low viscosity grade at low temperature such as SAE 75W and API GL-4. For that purpose, use MOTUL manual transmission gear oil GEAR POWER FE 75W.

Before use always refer to the owner manual or handbook of the vehicle.

Application: Transmission Fluid

Quality: Technosynthese®

Product Range: Car, Commercial Vehicles

API Standards: API GL-4

Capacity: 1 litre

10 masonry drill bits Ø 3-10 mm with carbide tip suitable for hammer drilling in masonry, limestone, natural stone and cast stone.

8 wood drill bits Ø 3-10 mm with centring tip for precise centring. For hardwood, softwood and plastic.

45 screwdriver bits with Phillips, Pozidriv, Torx, hexagon-head and longitudinal slot screw heads in all standard sizes, as well as 6 nutsetters. Suitable for all screwdriving applications.

Magnetic universal holder for fast bit changes and a reliable screw hold in the bit.

Dimensions (LxWxH): 321 x 71 x 228 mm

Weight: 1.694 kg

Contents:

• 1x LED torch
• 1x adjustable spanner
• 8x HSS-R metal drill bits, Ø 2-6 mm
• 10x masonry drill bits, Ø 3-10 mm
• 13x screwdriver bits, L=50 mm, PH 0/1/2/3, PZ 0/1/2/3, T 10/15/20/25, H 5
• 34x screwdriver bits, L=25 mm, PH 0/0/1/1/2/2/3/3, PZ 0/0/1/1/2/2/3/3, S 5/7, T 10/10/10/15/15/20/20/25/25/30/30/40/40, H 3/5/6
• 6x nutsetters, Ø 6/7/8/10/12/13 mm
• 1x universal holder, magnetic
• 1x countersink

- Non-Slip, EVA Foam Top Mat

- Heavy Duty Double Wall Construction for Strength

- Ball Bearing Drawer Slides for Smooth Gliding

- Sturdy Stainless Steel Side Handle

- Dual Front Handles for Easy Pull Out

- Central Locking System with Cylinder Lock

- TPR Swivel Casters

Content: 

A.  67pc 1/4″ Dr. Socket Set (Metric)
Contents:
- 13x 1/4″ Dr. 6pt Sockets: 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10 ,11, 12, 13, 14mm
- 7x 1/4″ Dr. 6pt Deep Sockets: 6, 7, 8, 10, 11, 12, 13mm
- 1x 1/4″ Dr. Quick-Release Offset Ratchet
- 2x 1/4″ Dr. Extension Bar: 2″ (50mm), 6″ (150mm)
- 1x 1/4″ Dr. Sliding T Handle: 4-1/2″ (115mm)
- 1x 1/4″ Dr. Universal Joint
- 1x 1/4″ Dr. Go- Thru Spinner Handle
- 1x 1/4″ Dr. 1/4″ (6mm) Bit Holder
- 22x 1/4″ Screwdriver Bits(25mm):
     3x Phillips: #1, #2, #3,
     6x Slotted: 3, 4, 5, 5.5, 6, 7mm
     3x Hex: 4, 5, 6mm
     3x Pozi: #1, #2, #3,
     6x Star: T15, T20, T25, T27, T30, T40,
     1x Adaptor
- 9x “L” Type Hex Key Wrenches: 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10mm
- 9x “L” Type Star Sky Wrenches: T10, T15, T20, T25, T27, T30, T40, T45, T50

B. 28pc 3/8″ Dr. Socket Set (Metric)
Contents:
- 14x 3/8″ Dr. 6pt Sockets: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22mm
- 6x 3/8″ Dr. 6pt Deep Sockets: 7, 8, 9, 10, 11, 12mm
- 1x 3/8″ Dr. Quick-Release Offset Ratchet
- 1x 3/8″ Dr. Sliding T-Handle: 8″(200mm)
- 2x 3/8″ Dr. Extension Bars: 3″(75mm), 6″(150mm)
- 1x 3/8″ Dr. Universal Joint
- 2x 3/8″ Dr. Spark Plug Socket: 16mm, 21mm
- 1x 1/2″ (F) x 3/8″ (M) Lighted Extension w/ 3/8″ (F) x 1/2″ (M) Adaptor

C. 26pc 1/2″ Dr. Socket Set (Metric)
Contents:
- 18x 1/2″ Dr. 6pt Sockets: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 27, 30, 32mm
- 4x 1/2″ Dr. 6pt Impact Sockets: 17, 19, 21, 22mm
- 1x 1/2″ Dr. Quick-Release Offset Ratchet
- 1x 1/2″ Dr. Universal Joint
- 2x 1/2″ Dr. Extension Bars: 5″(125mm), 10″(250mm)

D. 22pc 1/2″ Dr. Star Bit Socket & External Star Socket Set
Contents:
- 9x 1/2″ Dr. 55mm Star Bit Sockets: T20, T25, T27, T30, T40, T45, T50, T55, T60
- 10x 1/2″ Dr. 55mm Hex Bit Sockets: 4, 5 ,6, 7, 8, 10, 12, 14, 17, 19mm
- 4x 1/2″ Dr. 100mm Hex Bit Sockets: ,6, 7, 8, 10mm

E. 16pc Combination Wrench Set (Metric) 
Contents:
- 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16 ,17, 18, 19, 22, 24mm

F. 12pc 1/2″ Dr. Deep Socket & Combination Wrench Set (Metric) 
Contents:
- 8x 1/2″ Dr. 6pt Deep Sockets: 12, 13, 14, 15, 16, 17, 18, 19mm
- 4x Combination Wrenches: 27, 28, 30, 32mm

G. 5pc Snap Ring Pliers & Locking Pliers Set
Contents:
- 1x 7″ (180mm) Straight Nose Internal Pliers
- 1x 7″ (180mm) Bent Nose Internal Pliers
- 1x 7″ (180mm) Straight Nose External Pliers
- 1x 7″ (180mm) Bent Nose External Pliers
- 1x 10″ (250mm) Lock Grip Pliers

H. 4pc Professional Pliers Set
Contents:
- 1x 8″ (200mm) High Leverage Nose Pliers
- 1x 8″ (200mm) High Leverage Combination Pliers
- 1x 6″ (150mm) High Leverage Cutting Pliers
- 1x 10″ (250mm) Quick-Release Water Pump Pliers

I. 11pc Precision Screwdriver, Pliers & Pick Tool Set
Contents:
- 1x 6″ (150mm) Mini Diagonal Cutting Pliers
- 1x 6-1/2″ (165mm) Mini Long Nose Pliers
- 2x Precision Slotted Screwdrivers: 2.4 x 75mm, 3 x 75mm
- 2x Precision Phillips Screwdrivers: #0 x 75mm, #1 x 75mm
- 1x Strong Magnet Pocket Pick-Up Tool
- 1x 110mm Straight Hook
- 1x 110mm Offset 45° Hook
- 1x 110mm 90° Hook
- 1x 110mm 135° Hook

J. 7pc “XTRO Soft” Pro Screwdriver Set (Phillips & Slotted)
Contents:
- 5x Slotted Screwdrivers: 3 x 60mm, 4 x 80mm, 5.5 x 125mm, 6.5 x 150mm, 8 x 150mm
-  2x Phillips Screwdrivers: #1 x 80mm, #2 x 100mm

K. 9pc Professional File & Diamond Needle File Set
Contents:
- 1x 8″ 200mm Medium Flat File
- 1x 8″ 200mm Medium Round File
- 1x 8″ 200mm Medium Three-Square File
- 1x 8″ 200mm Medium Half-Round File
- 5x Diamond Needle Files (5 x 180mm)

L. 7pc Hammer, Punch and Chisel Set
Contents:
- 1x Pin Punch 5 x 10 x 180mm
- 1x Pin Punch 6 x 10 x 180mm
- 1x Center Punch 4 x 10 x 120mm
- 1x Taper Punch 6 x 10 x 120mm
- 1x 16 x 250mm Cold Chisel
- 1x 300g Engineer’s Hammer
- 1x 680g Dead Blow Hammer

- Dimensions: 666 (W) x 459 (D) x 885mm (H)

- 2 small Drawers: 569 (W) x 410 (D) x 75mm (H)

- 3 medium Drawers: 569 (W) x 410 x (D) x 101mm (H) 

- 1 large Drawer: 569 (W) x 410 (D) x 154mm (H)