This is a standard harness with non-specialised features and is recommended for those who need to navigate obstacles while working at heights. The double leg lanyard improves safety to the wearer by allowing them to remain attached to at least one anchor point at all times, through the use of one hook, while moving the second hook around the obstacle to a new anchor point. The adjustable leg straps improve safety to the wearer through a customised fit.

• Permanently attached, double leg, shock absorbing lanyard with scaffolding hooks
• Adjustable leg & chest straps
• Double scaffolding hooks
• One size fits all

This is a standard harness with non-specialised features and is recommended for those who need to navigate obstacles while working at heights. The double leg lanyard improves safety to the wearer by allowing them to remain attached to at least one anchor point at all times, through the use of one hook, while moving the second hook around the obstacle to a new anchor point. The adjustable leg straps improve safety to the wearer through a customised fit.  

The harness comes standard with a suspension trauma prevention strap that can be deployed in the event of fall, providing the wearer with a standing step to maintain healthy blood flow whilst awaiting rescue.

• Permanently attached double leg, shock absorbing lanyard, with scaffolding hooks
• Adjustable leg and chest straps
• Standing step

This is a belted harness with non-specialised features and is recommended
for those who need to navigate obstacles while working at heights. The
double leg lanyard improves safety to the wearer by allowing them to remain
attached to at least one anchor point at all times, through the use of one hook,
while moving the second hook around the obstacle to a new anchor point. The
adjustable leg straps improve safety to the wearer through a customised fit.
The adjustable shoulder straps and waist buckle provide enhanced comfort
to the wearer.

• Permanently attached, double leg, shock absorbing lanyard with scaffolding hooks
• Adjustable shoulder, leg, waist & chest straps
• One size fits all
• Double scaffolding hooks

This is a belted harness with non-specialised features and is recommended for those who need to navigate obstacles while working at heights. The double leg lanyard improves safety to the wearer by allowing them to remain attached to at least one anchor point at all times, through the use of one hook, while moving the second hook around the obstacle to a new anchor point. The adjustable leg straps improve safety to the wearer through a customised fit, while the adjustable shoulder straps and waist buckle provide enhanced comfort to the wearer. 

The harness comes standard with a suspension trauma prevention strap that can be deployed in the event of fall, providing the wearer with a standing step to maintain healthy blood flow whilst awaiting rescue.

• Permanently attached double leg, shock absorbing lanyard, with scaffolding hooks
• Adjustable shoulder, leg, waist and chest straps
• Standing step
• Double Snap hooks

This is an endless round climbing sling that is used to create an anchor point over a structure that is too large for the fall arrest connector hook.

The sling is comprised of 38mm seat belt webbing that is encased into 50mm tubular webbing to protect the equipment against abrasive material thereby enhancing the durability of the sling and improving the safety to the user.

Supplied as a set of two units, the user would wind each sling around the structure, connecting one fall arrest connector hook to one climbing sling.

It is important to note that the distance from the anchor point (now created on the structure) to the fall arrest body harness anchor point must not exceed 2000mm, i.e. 1750mm (lanyard length) + length of the endless round climbing sling < 2000mm.

• 38mm seat belt webbing encased into a 50mm tubular webbing
• Supplied as a set of two

This is a double leg, shock absorbing lanyard with two scaffolding hooks and a single snap hook connector that is engineered to attach to a dorsal D-ring on a stand-alone, fall arrest harness.

This lanyard is recommended for those who are required to navigate obstacles whilst working at heights. The double leg lanyard improves safety to the wearer by allowing them to remain attached to at least one anchor point at all times, through the use of one hook, while moving the second hook around the obstacle to a new anchor point.

The built-in shock absorber is engineered to reduce the total force experienced in a fall to a survivable force of less than 6kN.

• Double leg with scaffolding hooks
• Single leg with snap hook
• Shock absorber

This is an adjustable double leg, shock absorbing lanyard with two Scaffolding hooks and a single screw gate carabineer that is engineered to attach to a dorsal D-Ring on a stand-alone, fall arrest harness.

This lanyard is recommended for those who are required to navigate obstacles whilst working at heights. The double leg lanyard improves

safety to the wearer by allowing the wearer to remain attached to at least one anchor point at all times through the use of one hook, while moving the second hook around the obstacle to a new anchor point.

The adjustable legs allow the wearer to reduce the overall length of the lanyard, thereby reducing the fall distance and following best working-at-heights practice.  The built-in shock absorber is engineered to reduce the total force experienced in a fall to a survivable force of less than 6kN.

• Adjustable double leg with scaffolding hooks
• Single leg with screw gate carabineer
• Shock absorber

This is an elasticated double leg, shock absorbing lanyard with two Scaffolding hooks and a single Snap hook connector that is engineered to attach to a dorsal D-Ring on a stand-alone, fall arrest harness.

The elasticated lanyard lifts the hooks off the ground when not in use, reducing the wear and tear caused to hardware when dragged on the ground. It further improves safety to the wearer by reducing the potential of the lanyard being caught in dangerous machinery.

This lanyard is recommended for those who are required to navigate obstacles whilst working at heights. The double leg lanyard improves safety to the wearer by allowing them to remain attached to at least one anchor point at all times, through the use of one hook, while moving the second hook around the obstacle to a new anchor point.

The built-in shock absorber is engineered to reduce the total force experienced in a fall to a survivable force of less than 6kN.

• Elasticated double leg with scaffolding hooks
• Single leg with snap hook
• Shock absorber

This is a work positioning lanyard that forms part of a positioning device system.

The lanyard has been engineered to support the wearer on elevated vertical surfaces, such as a structure or pole.

The work positioning lanyard connects a wearer to an anchor point, by looping the lanyard around the anchor point and attaching itself to the side D-rings of the harness waist belt, thereby enabling the wearer to operate from heights, hands-free.

This must be used in conjunction with a fall arrest system.

The positioning lanyard has been fitted with PVC protective sleeve to enhance the durability of the product against abrasive materials and improve safety to the wearer.

• Double snap hooks
• Adjustable webbing with PVC protector

This is a rope access and rescue harness with specialised features. The
harness has been engineered for those who need to navigate obstacles whilst
ascending or descending from heights; performing a rescue; or working at
heights in conditions where multiple functionalities are required. 

The waist D-ring acts as the main rope anchor point whilst the chest D-ring
performs the function of a back-up rope anchor point or attachment point for
a vertical or retractable lifeline. 

The dorsal D-ring enables the wearer to select the correct lanyard attachment
for their work requirements, if needed, and the side D-rings enable the wearer
to attach a work positioning belt to free up their hands whilst working at
heights. The waist belt contains two gear loops where the wearer can attach
tools, freeing up their hands and improving safety whilst working at heights. 
Available in 4 sizes, the harness features fully adjustable straps in the back,
shoulder, waist, back leg and leg areas and are fitted with interlocking and
quick-release buckles  to improve the experience of donning and doffing the
harness. Comfort is further enhanced to the wearer through added padding
on the leg, waist and shoulder areas that enables pressure to be spread over
a larger area.

• 5 attachment points: Front waist, chest & Dorsal D-ring with work positioning D-rings & loops
• Adjustable leg, back leg, waist, shoulder & back straps with interlocking & quick-release buckles 
• Padding in the leg, waist and shoulder areas
• 2 Gear Loops

This is a mining harness with specialised features engineered for those navigating obstacles, below ground, while in a position of fall.

The harness features 3 attachment points; the dorsal D-Ring enables the wearer to select the correct lanyard attachment for their work requirement, whilst the 2 frontal attachment points enable a rescue to be performed without the wearer needing to detach from the anchor point.

Available in 4 sizes, the harness features fully adjustable straps in the shoulder, chest, waist and leg areas, enabling the wearer to customise the fit for enhanced comfort and better focus in even the most hazardous of conditions. Comfort is further enhanced through added padding to the straps between the shoulder blades and waist area enabling pressure to be spread over a larger area.

The harness comes standard with a suspension trauma prevention strap that can be deployed in the event of a fall, providing the wearer with a standing step to maintain healthy blood flow whilst awaiting rescue.

• Rescue pack & battery strap
• 3 attachment points: Dorsal D-ring & 2 frontal attachment points
• Adjustable leg, shoulder, chest & waist straps
• Padded waist & shoulder straps
• Standing step

This is a multi-purpose harness with specialised features engineered for
those who need to perform multiple functions whilst working at heights.
The harness features a dorsal D-Ring attachment point that enables the
wearer to select the correct lanyard attachment for their work requirement,
while the frontal D-Ring attachment point enables the wearer to perform a
rescue operation or provide an attachment point for a vertical or retractable
lifeline.

The 2 side D-Rings on the waist belt enable the wearer to attach a work
positioning belt to the harness thereby enabling them to free up their hands
while working at heights.

Available in 4 sizes, the harness features fully adjustable straps in the
shoulder, chest, waist and leg areas, enabling the wearer to customise the
fit for enhanced comfort and better focus on the job. Comfort is further
enhanced through added padding to the waist belt enabling pressure to be
spread over a larger area.

The harness comes standard with a suspension trauma prevention strap that
can be deployed in the event of a fall, providing the wearer with a standing
step to maintain healthy blood flow whilst awaiting rescue.

• 4 attachment points: Chest & dorsal D-ring with work positioning D-rings
• Adjustable leg, waist, shoulder, & chest straps
• Padded waist area
• Standing Step