For CLIC-R hose clamps
Polished, bright nickel-plated, joint gun-metal finish
Forged execution for clamp diameter 5 - 30 mm

For Similar DIY Tools, Please Click Here

Length (L, L1): 180 mm
Length: 7 inch
Weight: 247 g

For securely fitting piston rings
Handles blue coated
Bright nickel-plated

For Similar DIY Tools, Please Click Here

Length (L, L1): 200 mm
Length: 8 inch
Clamping range: 55-100 mm
Weight: 296 g

For drum brakes
With special holder and support crown, particularly suitable for glued brake linings
GEDORE vanadium steel 31CrV3, chrome-plated

For Similar DIY Tools, Please Click Here

Length (L, L1): 480 mm
Length: 19 inch
Weight: 956 g

With adjusting screw and release lever, model 137 10 with blue dip-insulated lever
Forged, tempered jaws and special jaw shape for secure gripping, clamping and holding
GEDORE vanadium steel 31CrV3, nickel-plated Jaw body in high-tensile sheet steel Automatically welded upper jaw - absolutely firm connection with the sheet steel body Well-conceived jaw design guarantees a three-point contact with all material cross-sections. Threaded bore welded at bottom
No widening under most extreme loading Safe release. Release lever under constant pressure of special spring

For Similar DIY Tools, Please Click Here

• Length (L, L1): 230 mm
• Length: 10 inch
• Clamping width: 32 mm
• Clamping width: 1.1/4 inch
• Weight: 526 g

For clamping tubes and round stock when welding
Cast steel jaws
Nickel-plated
Release lever dip-insulated

For Similar DIY Tools, Please Click Here

• Length (L, L1): 280 mm
• Length: 11 inch
• Clamping width 2: 10-90 mm
• Clamping width 2: 3/8-3.1/2 inch
• Weight: 967 g

Conforms to DIN ISO 8976 Form C
With safety box joint and finger protection
Automatic clamping with offset gripping surfaces
GEDORE chrome-vanadium special steel, chrome-plated, with polished surface
Induction-hardened serrated faces
Model C = slim handles with forged serrations
Model JC = chrome-plated, 2-component handles

For Similar DIY Tools, Please Click Here

• Length (L, L1): 250 mm
• Length (L2): 32.5 mm
• Width of head (b, b1, n, W3): 4.8 mm
• Height of head (a, a1, b, h, L2, t): 48 mm
• Clamping width: 31 mm
• Weight: 335 g

For Similar DIY Tools, Please Click Here

• Pipe diameter: 1/8-2 inch
• Pipe diameter: 10-60 mm
• Length (L, L1): 380 mm
• Weight: 2.9 kg

Most popular sizes, packed in environmentally-friendly cardboard box
Particularly suitable for barely accessible places
For internal and external circlip rings
With straight and 90 º angled tips

For Similar DIY Tools, Please Click Here

3 pieces Practical set composition in sturdy plastic case
JC = chrome-plated, 2-component handles with secure-grip hand protection

For Similar DIY Tools, Please Click Here

• For consistent use under tough working conditions.
• To cut all wire types including piano wire.
• Good lever action for easy cutting.
• In heat treated steel as per DIN EN 10083.
• Oil hardened, chrome plated.
• Cutting edges inductively re-hardened, approximately 64HRC.
• Handles with VDE dipped insulation as per DIN EN 60900.

For Similar DIY Tools, Please Click Here

Conforms to DIN ISO 5746

For heavy continuous use

Good lever action for easy cutting

Induction-hardened precision cutting edges, hardness 62 - 64 HRC

For flat and round material

To cut all wire types including piano wire, 1.6 mm

GEDORE special hardened and tempered steel, drop-forged, oil-hardened and annealed

JC = chrome-plated, 2-component handles

TL = black, with blue dipped handle protectors

For Similar DIY Tools, Please Click Here

Length (L, L1): 225 mm

Jaw length (L3): 42.2 mm

Width of head (b, b1, n, W3): 27.7 mm

Width of jaws (W4): 6.5 mm

Thickness of head (T1): 13 mm

Weight: 351 g

Flat-round tapered jaws, cross-hatched gripping surfaces
For holding, gripping and bending
Fine-tipped nose, for safe work in confined spaces
GEDORE special hardened and tempered steel, drop-forged, oil-hardened and annealed
JC = chrome-plated, 2-component handles
TL = black, with blue dipped handle protectors

For Similar DIY Tools, Please Click Here

• Length (L, L1): 200 mm
• Jaw length (L3): 75.7 mm
• Width of head (b, b1, n, W3): 18.5 mm
• Width of jaws (W4): 3.7 mm
• Thickness of head (T1): 9.5 mm
• Thickness of point (T2): 2.8 mm
• Weight: 201 g

Short jaws, serrated gripping faces
For gripping and bending
GEDORE special hardened and tempered steel, drop-forged, oil-hardened and annealed
JC = chrome-plated, 2-component handles
TL = black, with blue dipped handle protectors

For Similar DIY Tools, Please Click Here

• Length (L, L1): 140 mm
• Jaw length (L3): 29 mm
• Width of head (b, b1, n, W3): 17 mm
• Tip diameter (D1): 2.5 mm
• Thickness of head (T1): 8.5 mm
• Weight: 146 g