Size:

• 1/4" Dr. x 4" (100mm)
• 3/8" Dr. x 3" (75mm)
• 3/8" Dr. x 6" (150mm)
• 1/2" Dr. x 5" (125mm)

Push backwards to lock for straight driving

with 180° wobbel action 

1/4" (M) x 1/4" (F) Magnetic bit holder

for use in power drills and driver handles

62pc 1/4″ & 3/8″ Dr. Fits-All & Bolt Extractor Socket Set

Content:

- 11x 1/4″ Dr. Sockets: 4.5mm(3/16″), 5mm(13/64″), 5.5mm(7/32″), 6mm(1/4″), 7mm(9/32″), 8mm(5/16″), 9mm(11/32″), 10mm(3/8″), 11mm(7/16″), 12mm(15/32″), 13mm(1/2″)

- 11x 3/8″ Dr. Sockets: 8mm(5/16″), 10mm(3/8″), 11mm(7/16″), 12mm(15/32″), 13mm(1/2″), 14mm(9/16″), 15mm(19/32″), 16mm(5/8″),17mm(11/16″), 18mm(23/32″), 19mm(3/4″)

- 9x 3/8″ Dr. Bolt Extractor Socket: 8, 10, 11, 12, 13, 14, 16, 17, 19mm

- 1x 1/4″ Dr. Quick-Release Offset Ratchet

- 1x 3/8″ Dr. Quick-Release Offset Ratchet

- 2x 1/4″ Dr. Extension Bar: 2″ (50mm), 6″ (150mm)

- 1x 3/8″ Dr. Extension Bar: 3″ (75mm)

- 1x 1/4″ Dr. Universal Joint

- 1x 3/8″ Dr. Universal Joint

- 1x 1/4″ Dr. Go-Thru Spinner Handle

- 1x 1/4″ Dr. x 1/4″ Bit Holder

- 22x 1/4″ Screwdriver Bits (25mm):

3x Phillips: #1, #2, #3

6x Slotted: 3, 4, 5, 5.5, 6, 7mm

6x Star: T15, T20, T25, T27, T30, T40

3x Hex: 4, 5, 6mm

3x Pozi: #1, #2, #3

1x Adaptor

Chrome Vanadium steel with shot blast finish
Spring-loaded ball bearing for secure socket holding
Sizes: 
   • 1/4" Dr.
   • 3/8" Dr.
   • 1/2" Dr

5 pieces 3/8″ Dr. Flexible Tune up Tool Kit

- Handy set for spark plug replacement on most automobiles

- Flex head ratchet with extension bar enables access to confined areas

- Chrome Vanadium steel

- 90-Tooth, geared action

Content:

- 1x 3/8″ Dr. Flex head ratchet

- 1x 3/8″ Dr. x 6″ Extension bar

- 2x 3/8″ Dr. Spark plug sockets: 16, 21mm

- 1x Key chain spark plug gauge

131piece Thread Repair Tool Set

Content:

- 5x installation Tools

- 5x Break Pin Tools

- 5x Twist Drills

- 1x Hex Key

- 5x Taps: M5 x 0.8 x 6.7mm, M6 x 1.0 x 10.8mm, M8 x 1.25 x 10.8mm, M10 x 1.5 x 13.5mm, M12 x 1.75 x 16.3mm

- 110x Wire Thread Inserts

39pc Tap & Die Set

Contents:

- 16x Taps (Heavy Duty Alloy Steel): M3 x 0.5, M3 x 0.6, M4 x 0.7, M4 x 0.75, M5 x 0.8, M5 x 0.9, M6 x 0.75, M6 x 1.0, M7 x 0.75, M7 x 1.0, M8 x 1.0, M8 x 1.25, M10 x 1.25, M10 x 1.5, M12 x 1.5, M12 x 1.75

- 16x Dies (Heavy Duty Alloy Steel): M3 x 0.5, M3 x 0.6, M4 x 0.7, M4 x 0.75, M5 x 0.8, M5 x 0.9, M6 x 0.75, M6 x 1.0, M7 x 0.75, M7 x 1.0, M8 x 1.0, M8 x 1.25, M10 x 1.25, M10 x 1.5, M12 x 1.5, M12 x 1.75

- 2x NPT Tap & Die: 1/8" - 27

- 1x Tap Wrench: M3 - M12

- 1x T-Handle Tap Wrench: M3 - M6

- 1x Die Handle: 25mm O/D

- 1x Screw Pitch Gauge

- 1x Slotted Screwdriver

• Allow easy access to recessed head bolts

• Sizes: 1/2" x M12, 1/2" x RM10, Length: 140mm

• Use for VW, Audi cylinder head bolt

• Allow easy access to recessed head bolts

• Sizes: 1/2" x M8E, 1/2" x M10E, Length: 140mm

• Use for Toyota Camry Lexus cylinder head bolt

The 43-piece screwdriver bit set made from S2 modified steel is extraordinarily hard and fits power tools from Bosch and other manufacturers

With quick-change universal holder and magnetic universal holder as well as bits and holders with external hex shank

Nutsetter with permanent magnet for hex bolts (6, 8, 10 mm); length: 48-50 mm

Dimensions (length 35 mm): PH1, (2x) PH2, PH3, PZ1, (2x) PZ2, PZ3, SL3, SL4, SL5, SL6, T10, T15, (2x) T20, T25, T27, T30, T40, T10H, T15H, (2x) T20H, T25H, T27H, T30H, T40H

Dimensions (length 75 mm): PH2, PZ2, SL6, T15, T20, T25

Bits are colour coordinated for easier selection

Come in a robust plastic storage case

A variety of Phillips, Pozi, Slotted, Torx, Tamperproof Torx, Hex and Nutsetters

Specification:

- PH 25mm: 1/2/2/3. & 75mm: 2

- PZ 25mm: 1/2/2/3. & 75mm: 2

- Slotted 25mm: 3/4/5/6. & 75mm: 5

- Hex 25mm: 3/4/5/6

- Torx 25mm: 10/15/20/20/25/27/30/40. & 75mm: 15/20/25

- Tamperproof Torx 25mm: 10/15/20/20/25/27/30/40